Hint | Answer | % Correct |
---|---|---|
Fibre Glass Pre-Formed | Got it! | 100%
|
-One Piece, Section or Segmental? | One piece and Sectional | 100%
|
-Thermal Conductivity at 50F? | 0.35 btu | 0%
|
-Thickness | 0.5 (-) 4" | 0%
|
-Sizes? | 0.5" x 60" x 25 Yards | 0%
|
-Maximum Temperature? | 1000F | 0%
|
-Maximum Temperature? | 1000F | 0%
|
-In What Ratio is the Spray Pack? | 1:1 | 0%
|
-Assuming 1" Thickness, How Deep Should the V-Grooves Be? | 1 1/4" | 0%
|
-Thickness? | 1 (-) 1.5 (-) 2" | 0%
|
Thickness? | 1/2" (-) 2" | 0%
|
-Thickness? | 1/2" (-) 2" | 0%
|
-Sizes on Flat Blocks? | 12" x 18", 18" x 24" | 0%
|
-Roll Form Comes in What Size? | 1/2" x 48" x 50' | 0%
|
-Thickness? | 1" (-) 4" | 0%
|
-Thickness on Flat Blocks to Respective Sizes? | 1.5" (-) 4", 2" (-) 4" | 0%
|
-Density Type 1? | 1.5 lbs | 0%
|
-Density? | 1.5 lbs | 0%
|
-Roll Form Comes in What Size? | 1.5" x 48" x 25' | 0%
|
-Pins Should be Spaced How Far Apart? | 16" | 0%
|
-Density? | 1.6 (-) 2 lbs | 0%
|
-Density? | 1.6 (-) 7 lbs | 0%
|
-Flat Material Comes in Thicknesses? | 1/8" (-) 1" | 0%
|
-Roll Form Comes in What Size? | 1" x 48" x 35' | 0%
|
-Sizes? | 1" x 60" x 15 Yards | 0%
|
-Sizes on Pipe Covering? | 24" | 0%
|
-Maximum Temperature? | 250F | 0%
|
-Temperature Range with Vapour Barrier Jacketing? | 250F | 0%
|
-Maximum Temperature? | 250F | 0%
|
-Density Type 2? | 2.5 lbs | 0%
|
-Self Adhesive Tape Comes in? | 2" x 1/8" | 0%
|
-Sizes? | 2' x 4' | 0%
|
-Sizes? | 2" x 4" | 0%
|
-Temperature Range? | -330F (-) 200F | 0%
|
-Thickness? | 3/4" (-) 4" | 0%
|
-Density? | 3 (-) 4.5 lbs | 0%
|
-Roll Form Comes in What Size? | 3/4" x 48" x 50' | 0%
|
-Temperature Range? | 350F | 0%
|
-Density? | 3.5 lbs | 0%
|
-Wall Thicknesses up to? | 3/8", 1/2", 3/4" | 0%
|
-Flat Material Comes in? | 3' x 4' | 0%
|
-Thickness? | 4" | 0%
|
-Temperature Range? | -40F (-) 220F | 0%
|
-Temperature Range? | 450F (-) 1000F | 0%
|
-Temperature Range? | -450F (-) 900F | 0%
|
-Sizes for IP (Up to)? | 5" | 0%
|
-Copper Tube Sizes | 5 / 8" (-) 6 1/8" | 0%
|
-Iron Pipe Sizes | .5" IP to 30" IP | 0%
|
-Maximum Velocity of Ducts to be Used on? | 6000 fpm | 0%
|
-Maxiumum Velocity of Ducts to be Used on? | 6400 fpm | 0%
|
-Available in What Lengths? | 72" | 0%
|
-Density? | 7.5 lbs | 0%
|
-Flexural Strength? | 80 lbs | 0%
|
-Temperature Range? | 850F | 0%
|
-Density? | 8 lbs | 0%
|
-Extruded Foam Plastics is Known as? | Armaflex | 0%
|
-Adhesive to Use? | Armstrong 520 | 0%
|
-Comes in Which Form? | Board | 0%
|
-Available in? | Board, Sectional Pipe Covering | 0%
|
-Type 2 Used on? | Boilers and Vessels | 0%
|
-Where should the lap be? | Bottom | 0%
|
-Covered in Indoor Applications With? | Cements and Canvas | 0%
|
-How to Calculate Required Length? | Circumference + 2(T)3.14 + 3" | 0%
|
-How to Calculate Length Required? | Circumference + 2(T))3.14 + Lap | 0%
|
-Used to Prevent? | Condensation | 0%
|
-Jacketed Material Secured in Place With? | Contact Adhesive | 0%
|
-Armstrong 520 is What Kind of Adhesive? | Contact Adhesive | 0%
|
-Used on? | Cooler and Freezer Applications | 0%
|
-How to Seal? | Cut out 3" of glass fibre | 0%
|
-Used for Hot or Cold.... | Ductwork | 0%
|
-Secured How? | Filament Tape, Bands | 0%
|
-Secured With? | Foil Skrim Kraft Tape | 0%
|
-Vapour Barrier? | Foil Skrim Kraft Tape | 0%
|
-Secured on a Concealed Duct With? | Foil Tape or Wire | 0%
|
-What PPE Should be Especially Worn? | Glasses | 0%
|
Next: Extruded Foam Plastics | Got it! | 0%
|
Next: Temp-Matt | Got it! | 0%
|
Next: Fibre Glass Thermal and Acoustic Duct | Got it! | 0%
|
Next: Polystyrenes | Got it! | 0%
|
Next: Fibre Glass Rigid Duct Exterior | Got it! | 0%
|
Next: Fibre Glass Rigid Thermal and Acoustic Duct | Got it! | 0%
|
Next: Fibre Glass Flexible Batt Insulation | Got it! | 0%
|
Next: Foam Glass | Got it! | 0%
|
Next: Fibre Glass Equipment Board | Got it! | 0%
|
Next: Fibre Glass Wrap Around | Got it! | 0%
|
Next: Polyurethane | Got it! | 0%
|
Next: Fibre Glass Flexible Duct | Got it! | 0%
|
-Used on? | Heated industrial Equipment | 0%
|
-What Must be Kept Under 350F? | Hot Tar | 0%
|
-Used for? | Inside Indoor Ventilation Ducts | 0%
|
-What is Applied over the Metal Mesh Blanket? | Insulating Cements, Metal Jacketing | 0%
|
-What are Spray Packs Used for? | Irregular Surfaces | 0%
|
-What are the 2 Components of Polystyrene Spray? | Isocynates and Resins | 0%
|
-Type 1 Used on? | Lightweight Insulation onto Irregular Surfaces | 0%
|
-Standard Colour, Subject to Change? | Light Yellow | 0%
|
-Attached to Flat Surfaces, Walls Using? | Mechanical Fasterner, Mastic Adhesives | 0%
|
-Used on? (e.x. Plumbing, Heating, AC, Dual Temperatured e.t.c.) | Mechanical Systems | 0%
|
-What is Used to Clean Armstrong 520? | MEK | 0%
|
-Metal Lath and Hexagon Wire Enveloping AW Wool Type 2 is Called? | Metal Mesh Blancket | 0%
|
-Coated for Fibre Erosion Prevention With What? | Neoprene | 0%
|
-Will it Initiate Stress Corrosion? | No | 0%
|
-Applied Over Exterior of the Duct With? | Non-contact Adhesive | 0%
|
-When Using the 50% Coverage Method, What Item is Used? | Notched Trowel | 0%
|
-Applied over? | Pins | 0%
|
-Used on? | Piping and Equipment | 0%
|
-Application on Exposed Indoor Canvas? | PVC or Metal Jacketing | 0%
|
-Used on Cold or Dual Temperatured....? | Rectangular Ducts | 0%
|
-On High Velocities, What Should be Installed onto Joints? | Reinforcing Fabric | 0%
|
-Comes in Which Form? | Rolls | 0%
|
-Supplied in? | Rolls | 0%
|
-Used on? | Round or Irregular Ducts | 0%
|
-Application of Material on Curved Surfaces? | Scored or Cut into Lags | 0%
|
-Method to Carve Around Curved Ducts? | Score Material | 0%
|
-Available in Pipe Covering, Flat Sheets, Rolls and what? | Self Adhesive Tape | 0%
|
-What Important Tool is Used to Cut Armaflex? | Sharp, Thin, Knife | 0%
|
-What is Used to Hold Polystyrene Board Into Place? | Skewers, Fibrous Adhesive | 0%
|
-I know it as? | Sponge Rubber | 0%
|
-Also Known as? | TempWrap | 0%
|
-When Installing Metal Mesh Blanket on a Vessel, You Start at the... | Top | 0%
|
-What Will Break Down Polystyrenes other than Solvents and Coal? | UV Rays | 0%
|
-Breaks in Vapour Barrier Sealed With? | Vapour Barrier Tape | 0%
|
-Density? | Varying | 0%
|
-Method to Carve Around Corners? | V-Groove | 0%
|
-If Applied onto Conrete, What Material Should be Used? | Wall Anchors | 0%
|
-Method of Attachment? | Welded Pins | 0%
|
-Installation on Flat Surfaces? | Welded Pins | 0%
|
-Held into Place With? | Welded pins, Clips, Non-contact Adhesive | 0%
|
-Armstrong 520 is Available in What Colours? | White or Grey | 0%
|
-How to Seal? | Wire or Bands | 0%
|
-Installation on Curved Surfaces? | Wire or Bands | 0%
|
-Joints Should be Tight and Sealed With Vapour Barrier Adhesive? | Yes | 0%
|
-Excellent Acoustic Properties? | Yes | 0%
|
-Outdoor Weatherproof Jacket? | Yes | 0%
|
-Outdoor Weather Proof Finish? | Yes | 0%
|
-Covered in Outdoor with Weather Proof Jacketing? | Yes | 0%
|
-Vapour Barrier Facing? | Yes | 0%
|
-Available in Lightweight or Heavyduty Board? | Yes | 0%
|
--Completely Coated or with Strips on 12" Centres Covering 50%? | Yes | 0%
|
-Is a Closed Cell Rigid Plastic Foam Material? | Yes | 0%
|
-All Clips and Joints Sealed to Prevent Erosion? | Yes | 0%
|
-Black Fire Resistant Coating Facing Airstream? | Yes | 0%
|
-Used on Turbines, Nuclear, and Industrial Applications? | Yes | 0%
|
-Can be Used on Stainless Steel? | Yes | 0%
|
-Closed Cell, Incombustible, Impermeable, Fire Reducing Material? | Yes | 0%
|
-Low Moisture Permeability? | Yes | 0%
|
-Protective Surfaces to be Used on Indoor/Outdoor Applications? | Yes | 0%
|
-Closed Cell Material if all Joints are Sealed? | Yes | 0%
|
-Use Fire Resistant Adhesive if Pin Welding Isn't Complete? | Yes | 0%
|
Copyright H Brothers Inc, 2008–2024
Contact Us | Go To Top | View Mobile Site