Statistics for Cisco Wireless Architecture

Click here to take the quiz!

Answer	Hint	% Correct
Access Port	Port that can only be assigned to a single VLAN	100%
Bridge	LWAP becomes a bridge between two networks; multiple APs in this mode can form a mesh network	100%
Flex + Bridge	Allows APs in mesh mode to locally switch traffic if tunnel to WLC goes down	100%
Flexconnect	LWAP will locally switch traffic if tunnel to WLC is down	100%
Light Weight Access Point	LWAP	100%
Lightweight Access Point Protocol	LWAPP	100%
Rouge Detector	LWAP dedicates itself to detecting rouge devices	100%
SE Connect	AP dedicates its radios to spectrum analysis on all of its channels	100%
Sniffer	LWAP dedicates itself as a sniffer	100%
Trunk Port	Port that can carry traffic of multiple VLANs	100%
Wireless LAN Controller	WLC	100%
Link Aggregation Port	LAG	50%
Monitor	LWAP does not transmit, but instead checks for IDS events, rouge AP, and position of stations	50%
Control and Provisioning of Wireless Access Points	CAPWAP	0%
Local	LWAP and WLC act as if they're in the same location	0%
UDP 5246, 5247	CAPWAP Ports	0%