Show Me / Tell Me

Quiz by JustSomeKid
Rate:
Last updated: September 16, 2023
You have not attempted this quiz yet.
First submittedSeptember 13, 2023
Times taken1
Report this quizReport
30:00
Enter answer here
0
 / 14 guessed
The quiz is paused. You have remaining.
Scoring
You scored / = %
This beats or equals % of test takers also scored 100%
The average score is
Your high score is
Your fastest time is
Keep scrolling down for answers and more stats ...
Hint
Answer
Q1: Tell me how you would check that the brakes are working before starting a journey.

Just as you move off - the brakes. They should not feel - and the car should not - to - -
Operate Spongy Pull One Side
Q2: Tell me where you’d find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.

Information will be found using the - - - Check the tyre pressures using a - - - when the tyres are - Don't forget the - - and remember to refit the - -
Car Manufacturers Manual Reliable Pressure Gauge Cold Spare Tyre Valve Caps
Q3: Tell me how you make sure your head restraint is correctly adjusted, so it provides the best protection in the event of a crash.

Head restraint should be adjusted so the - - of the head restraint is at least as high as the - or the - of the - and as close to the - of the head as is -
Centre Part Eyes Top Ears Back Comfortable
Q4: Tell me how you’d check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.

A safe tyre will have no - or - on the sides, the tread depth must be at least - across the central - of the breadth of the tyre and the outer - and can be measured using a - - gauge.
Cuts Bulges 1.6mm 3/4 Circumference Tread Depth
Q5: Tell me how you’d check that the headlights and taillights are working. You don’t need to exit the vehicle. This is a ‘tell me’ question, so you do not need to physically check the lights.

You would turn on the - - and the car - if needed, then - - the vehicle to check the lights
Lights Switch Ignition Walk Around
Q6: Tell me how you’d know if there was a problem with your anti-lock braking system.

A - - should - on the - if there is a fault with the anti-lock braking system
Warning Light Illuminate Dashboard
Q7: Tell me how you’d check the direction indicators are working. This is a ‘tell me’ question, so you do not need to physically check the indicators.

Activate the - - - and - - - - to see if all indicators are working correctly.
Hazard Warning Lights Walk Around The Car
Hint
Answer
Q8: Tell me how you’d check the brake lights are working on this car. This is a ‘tell me’ question, so you do not need to physically check the brake lights.

Operate the - -, make use of - in windows or doors, or - - to help.
Brake Pedal Reflections Ask Someone
Q9: Tell me how you’d check the power-assisted steering is working before starting a journey.

If steering becomes - power steering may be faulty. Before starting a journey two checks can be made. 1: - - on the steering wheel should result in - but - movement. 2: Turning the steering wheel just after moving off will give an - indication, as steering should be - - if all is working.
Heavy Gentle Pressure Slight Noticeable Immediate Very Easy
Q10: Tell me how you’d switch on the rear fog light(s) and explain when you’d use it/them.

Operate - . Check - - is on. Fog lights must only be used in - - - conditions and must be - - when fog disperses
Switch Warning Light Foggy Low Visibility Turned Off
Q11: Tell me how you switch your headlight from dipped to main beam and explain how you’d know the main beam is on.

Operate - - , ignition may need to be switched on or engine started, activate - - lights, and check the blue - - warning light is on
Light Switch Main Beam Main Beam
Q12: Open the bonnet and tell me how you’d check that the engine has sufficient oil.

Identify the - . Explain that you would - the - and - - the end with the maximum and minimum - -, and - - . Remove again and check - - against min and max markings. If oil level is low, - - with oil but do not - -.
Dipstick Remove Dipstick Wipe Clean Level Indicator Fully Reinsert Oil Level Top Up Over Fill
Q13: Open the bonnet and tell me how you’d check that the engine has sufficient engine coolant.

Identify the - - - and check the - and - level indicator on the - of the - . Explain if coolant is - the minimum mark, more - will need to be added. Explain to do this you would - the - - when the engine is - and pour in coolant until the - - is reached.
Engine Coolant Tank Minimum Maximum Side Tank Below Coolant Unscrew Tank Cap Cold Maximum Mark
Q14: Open the bonnet and tell me how you’d check that you have a safe level of hydraulic brake fluid.

Identify - - reservoir, check level against - and - markings
Brake Fluid High Low
No comments yet