Hint
|
Answer
|
-Use Fire Resistant Adhesive if Pin Welding Isn't Complete?
|
Yes
|
-Thickness?
|
1/2" (-) 2"
|
Next: Fibre Glass Flexible Batt Insulation
|
Got it!
|
-Used on?
|
Piping and Equipment
|
-Maximum Temperature?
|
1000F
|
-Density Type 1?
|
1.5 lbs
|
-Density Type 2?
|
2.5 lbs
|
-Type 1 Used on?
|
Lightweight Insulation onto Irregular Surfaces
|
-Type 2 Used on?
|
Boilers and Vessels
|
-Metal Lath and Hexagon Wire Enveloping AW Wool Type 2 is Called?
|
Metal Mesh Blancket
|
-What is Applied over the Metal Mesh Blanket?
|
Insulating Cements, Metal Jacketing
|
-When Installing Metal Mesh Blanket on a Vessel, You Start at the...
|
Top
|
Next: Temp-Matt
|
Got it!
|
-Used on Turbines, Nuclear, and Industrial Applications?
|
Yes
|
-Maximum Temperature?
|
1000F
|
-Can be Used on Stainless Steel?
|
Yes
|
-Will it Initiate Stress Corrosion?
|
No
|
-Sizes?
|
0.5" x 60" x 25 Yards
|
-Sizes?
|
1" x 60" x 15 Yards
|
Next: Foam Glass
|
Got it!
|
-Closed Cell, Incombustible, Impermeable, Fire Reducing Material?
|
Yes
|
-Thermal Conductivity at 50F?
|
0.35 btu
|
-Temperature Range?
|
-450F (-) 900F
|
-Density?
|
8 lbs
|
-Sizes on Pipe Covering?
|
24"
|
-Thickness?
|
1" (-) 4"
|
-Flexural Strength?
|
80 lbs
|
-Sizes on Flat Blocks?
|
12" x 18", 18" x 24"
|
-Thickness on Flat Blocks to Respective Sizes?
|
1.5" (-) 4", 2" (-) 4"
|
Next: Polystyrenes
|
Got it!
|
-Used on?
|
Cooler and Freezer Applications
|
-Low Moisture Permeability?
|
Yes
|
-Secured How?
|
Filament Tape, Bands
|
-Attached to Flat Surfaces, Walls Using?
|
Mechanical Fasterner, Mastic Adhesives
|
-When Using the 50% Coverage Method, What Item is Used?
|
Notched Trowel
|
-What Will Break Down Polystyrenes other than Solvents and Coal?
|
UV Rays
|
-What is Used to Hold Polystyrene Board Into Place?
|
Skewers, Fibrous Adhesive
|
-What Must be Kept Under 350F?
|
Hot Tar
|
-Protective Surfaces to be Used on Indoor/Outdoor Applications?
|
Yes
|
Next: Polyurethane
|
Got it!
|
-Is a Closed Cell Rigid Plastic Foam Material?
|
Yes
|
-Temperature Range?
|
-330F (-) 200F
|
-Density?
|
1.6 (-) 2 lbs
|
-Standard Colour, Subject to Change?
|
Light Yellow
|
-Available in?
|
Board, Sectional Pipe Covering
|
-What are Spray Packs Used for?
|
Irregular Surfaces
|
-What are the 2 Components of Polystyrene Spray?
|
Isocynates and Resins
|
-In What Ratio is the Spray Pack?
|
1:1
|
-What PPE Should be Especially Worn?
|
Glasses
|
-Joints Should be Tight and Sealed With Vapour Barrier Adhesive?
|
Yes
|
Next: Extruded Foam Plastics
|
Got it!
|
-I know it as?
|
Sponge Rubber
|
-Used on? (e.x. Plumbing, Heating, AC, Dual Temperatured e.t.c.)
|
Mechanical Systems
|
-Used to Prevent?
|
Condensation
|
-Temperature Range?
|
-40F (-) 220F
|
-Density?
|
7.5 lbs
|
-Closed Cell Material if all Joints are Sealed?
|
Yes
|
-Available in Pipe Covering, Flat Sheets, Rolls and what?
|
Self Adhesive Tape
|
-Sizes for IP (Up to)?
|
5"
|
-Wall Thicknesses up to?
|
3/8", 1/2", 3/4"
|
-Available in What Lengths?
|
72"
|
-Flat Material Comes in?
|
3' x 4'
|
-Flat Material Comes in Thicknesses?
|
1/8" (-) 1"
|
-Extruded Foam Plastics is Known as?
|
Armaflex
|
-Self Adhesive Tape Comes in?
|
2" x 1/8"
|
-Roll Form Comes in What Size?
|
1/2" x 48" x 50'
|
-Roll Form Comes in What Size?
|
3/4" x 48" x 50'
|
-Roll Form Comes in What Size?
|
1" x 48" x 35'
|
-Roll Form Comes in What Size?
|
1.5" x 48" x 25'
|
-Adhesive to Use?
|
Armstrong 520
|
-Armstrong 520 is What Kind of Adhesive?
|
Contact Adhesive
|
-What Important Tool is Used to Cut Armaflex?
|
Sharp, Thin, Knife
|
-What is Used to Clean Armstrong 520?
|
MEK
|
-Armstrong 520 is Available in What Colours?
|
White or Grey
|