Description | Answer | % Correct |
---|---|---|
Conical, with flat outer face and tapering inner face allowing it to sink into the material. The angle of the screw is measured as the full angle of the cone. | Countersunk Head | 90%
|
A low disc with a rounded, high outer edge with large surface area | Pan head | 40%
|
Cylindrical with a rounded top | Button head | 30%
|
Disc with cylindrical outer edge, height approximately half the head diameter | Cheese head | 20%
|
Cylindrical, but with a slightly convex top surface. Height to diameter ratio is larger than cheese head. | Fillister head | 10%
|
Lower-profile dome designed to prevent tampering | Mushroom Head | 10%
|
A decorative screw head with a countersunk bottom and rounded top | Oval Head | 10%
|
A dome-shaped head used for decoration. | Round head | 10%
|
Similar to countersunk, but there is a smooth progression from the shank to the angle of the head, similar to the bell of a bugle | Bulge head | 0%
|
Copyright H Brothers Inc, 2008–2024
Contact Us | Go To Top | View Mobile Site