Statistics for Extricate a Victim Entrapped in a Motor Vehicle

Click here to take the quiz!

General Stats
Answer Stats
Score Distribution
Your Score History

General Stats

This quiz has been taken 0 times
The average score is 0 of 25

Answer Stats

Hint	Answer	% Correct
Line 24	After the door is removed, make relief cuts behind the strut mounts to eliminate movement of the front end of the vehicle	0%
Line 20	After the glass is removed, cut the first post furthest from the victim	0%
Line 5	Apply the parking break	0%
Line 11	Create a purchase point at the edge of the door near the latch	0%
Line 8	Crib the vehicle until the required height has been achieved or operate the jack until the desired lift is achieved	0%
Line 21	Cut remaining posts, with the final cut on the post closest to the victim. Support the roof throughout the removal	0%
Line 25	Cut the upper portion of the A-post if the roof is intact	0%
Line 23	Displace a dashboard by: Jacking or lifting with spreaders or pushing or rolling	0%
Line 2	Identify vehicle's construction, condition, and integrity	0%
Line 15	Insert spreader tips at the hinges so that they will force the door down and away from victims and the rescue personnel	0%
Line 12	Insert the spreader tips slightly above the door lock so that they push the door outward	0%
Line 6	Inspect the vehicle and confirm that it is stabilized	0%
Line 13	Maintain control of the door in order to prevent it from striking anyone	0%
Line 10	Open or remove the door with extrication tools	0%
Line 14	Open the spreader arms until the door opens	0%
Line 16	Open the spreaders until the first hinge fails or can be cut	0%
Line 4	Place chocks in front of and behind tires. Center chocks snugly and squarely against the tread of each tire	0%
Line 3	Provide initial stabilization	0%
Line 18	Remove the door	0%
Line 22	Remove the roof	0%
Line 19	Remove the roof of a wheel-resting passenger vehicle	0%
Line 9	Remove the vehicle glass using appropriate tools safely and correctly depending on the glass construction.	0%
Line 17	Repeat the process for the second hinge	0%
Line 1	Take necessary precautions to protect rescuers and victims from hazards including, but not limited to, glass fragments, jagged metal, SRS gas cylinders, underplayed airbags, and fire hazards	0%
Line 7	Verify that the surface under the support locations will support the weight of the vehicle and equipment	0%