Hint
|
Answer
|
Line 1
|
Take necessary precautions to protect rescuers and victims from hazards including, but not limited to, glass fragments, jagged metal, SRS gas cylinders, underplayed airbags, and fire hazards
|
Line 2
|
Identify vehicle's construction, condition, and integrity
|
Line 3
|
Provide initial stabilization
|
Line 4
|
Place chocks in front of and behind tires. Center chocks snugly and squarely against the tread of each tire
|
Line 5
|
Apply the parking break
|
Line 6
|
Inspect the vehicle and confirm that it is stabilized
|
Line 7
|
Verify that the surface under the support locations will support the weight of the vehicle and equipment
|
Line 8
|
Crib the vehicle until the required height has been achieved or operate the jack until the desired lift is achieved
|
Line 9
|
Remove the vehicle glass using appropriate tools safely and correctly depending on the glass construction.
|
Line 10
|
Open or remove the door with extrication tools
|
Line 11
|
Create a purchase point at the edge of the door near the latch
|
Line 12
|
Insert the spreader tips slightly above the door lock so that they push the door outward
|
Line 13
|
Maintain control of the door in order to prevent it from striking anyone
|
Line 14
|
Open the spreader arms until the door opens
|
Line 15
|
Insert spreader tips at the hinges so that they will force the door down and away from victims and the rescue personnel
|
Line 16
|
Open the spreaders until the first hinge fails or can be cut
|
Line 17
|
Repeat the process for the second hinge
|
Line 18
|
Remove the door
|
|
Remove the roof of a wheel-resting passenger vehicle
|
Line 20
|
After the glass is removed, cut the first post furthest from the victim
|
Line 21
|
Cut remaining posts, with the final cut on the post closest to the victim. Support the roof throughout the removal
|
Line 22
|
Remove the roof
|
|
Displace a dashboard by: Jacking or lifting with spreaders or pushing or rolling
|
|
After the door is removed, make relief cuts behind the strut mounts to eliminate movement of the front end of the vehicle
|
|
Cut the upper portion of the A-post if the roof is intact
|